U.S. Solid 3/8" 12V DC Brass Electric Solenoid Valve Air Water, Normally Closed

3/8″ Solenoid Valve by US Solid; Brass w Viton Seal, Normally Closed,
Direct Lift, Electric 12V DC
U.S. Solid normally closed (N/C) electric solenoid valve is constructed with a durable brass body, two-way inlet and outlet ports with three-eighth inch (3/8″) female threaded (NPT) connections, and heat and oil resistant Viton gasket.
Suitable for use and for use with hot or cold water, air, very low viscosity fluids (< 20 cst), oils and hydrocarbons, e.g., gasoline, kerosene, or diesel fuel. The solenoid valves have a rating of IP65, which means they can withstand spray from water. However, if permanently installed outdoors, it is recommended that you enclose the valves in some protective housing. Not for use underwater. Customers chose this general purpose valve for: do-it-yourself projects, moderate temperature applications, harsh chemicals, flow control for irrigation systems, reverse osmosis system, electronic control of tank selection, water line, or motorcycle air shocks.
Features
Brand
U.S. Solid
Model
USS2-00006
Port Size
3/8″
Flow Aperture
4 mm
Body Material
Brass
Gasket / Diaphragm / Seal
VITON
Rated voltage
DC 12V, ±10%
Current
1.667 A
Power rating
20 W
Operation Type
Direct Lift Valve
Operation Mode
Normally Closed
Operational pressure range
Air, Water, Gases
0 to 101 PSI (0-7 Bar)
Oil
0 to 72 PSI (0-5 Bar)
Flow capacity
0.6 gallons per minute (GPM) of water at 60oF with a pressure drop of 1 PSI
Flow value
0.6 Cv
Minimum operational temperature
14 degrees Fahrenheit (-10 degrees Celsius)
Maximum operational temperature
248 degrees Fahrenheit (120 degrees Celsius)
Suitable Media
Air, water, oil, Diesel fuel, kerosene etc.
Quality assurance
CE Certified
Attention
1. California Residents:
This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov
.
2.
OVERHEATING WARNING:
Not designed for continuous operation(not a 100% duty cycle). While energized, under normal operating conditions, solenoid valve will get HOT. The coil will reach a maximum temperature of about 85℃. It is fully complied with national standard: JB/T7352-2010. If energized continuously for more than 8h the coil may burn.
Shipping
Total delivery time = Processing Time + Shipping Time
Processing Time
1-2
Business Days
Shipping Time
3-5
Business Days (Expedited Shipping: Fedex or USPS)
Tips:
The delivery maybe delayed due to customs clearance, Carriers delay and / or other reasons. All our customers are very important to us, if you encounter delivery or”quality” problems, please don’t open the case but contact us in time by ebay messages first, we will try our best to work it out with you.
For buyers in US, please kindly note there might be import customs duties for items shipped from China ranging from 5% to 30%, which will be paid by the buyer. For buyer outside US, please note customs charges, if any, are not included in the item price or shipping charges. Buyers will be responsible for customs clearance and potential tariff. The amount of tariff is composed of two parts. Part one is approximately 1% to 5% of the total price (item price + shipping price). Part two is VAT, which in most cases can be deducted in your business tax. Feel free to contact us for any questions.
Return Policy
1. Returns are accepted within
60 days
after buyer receives the item.Buyer is responsible for return shipping costs if it is not our fault. A refund will be issued within 2 business days after we receive the returned item.
2.Returned item has to be
in its original condition, no returns for customized items
.