3/8" 12VDC Hose Barb Electric Solenoid Valve, Plastic Body, Water, 12-volt DC NC

DDB-CS-12VDC
Valves4projects — supplying high quality valves since
2004.  Over 50,000 valve orders shipped.
EHCO
TECH  CCB-CS-12VDC SOLENOID VALVE
3/8″ HOSE BARBS  |  12-Volt DC
| Nylon Valve Body / NBR Seal |  Normally Closed
 |  3 – 145 psi
NOTE: This valve is for pressurized systems only. We have a
gravity feed version of this valve in our eBay store.
General
Great general purpose water valve for many
projects
2-way,
Normally Closed
(energize to
open, de-energize to close), unidirectional
Very Fast acting
Can be mounted in any position
Port / Orifice Size
3/8″ hose barb
inlet / outlet ports
(for 3/8″ inside diameter hose)
Internal orifice diameter: 8 mm (about 3/8″)
Flow rate at 50 psi is >4GPM.
Pressure and Temperature
3 to 145 psi
(not for gravity feed
systems)
Max media temp: 175° F (80° C)
For use in pressurized systems only
Note: most low pressure, high volume fountain
type pumps do not work with these types of solenoid valves
Suitable Media
Water
Low viscosity fluids compantible with valve
materials
DO NOT use with fuels
Coil / Electrical
12-Volt DC / 450 mA
Standard 1/4″ spade connectors for electrical
connection (connectors available in hardware stores, auto parts
stores etc.)
Wires can also also be soldered to the
terminals
No polarity requirements (connect positive to
one termial and negative to the other)
NOTE: We also carry this valve in 24VDC,
24VAC, and 120VAC voltages in our
eBay

store
Valve Materials
Valve body:  Nylon
Plunger and plunger guide tube: Stainless
Steel (300 and 400 series)
Diaphragm:  NBR
Diaphragm plate: Polyoxymethylene (POM)
Dimensions
Height: 2-7/32″
Width: 2″
Length: 3-1/4″
Weight: 4 oz
Store Policies
If you are not completely
satisfied, please contact us and we will make it right!
12 month warranty
Copyright © Ehcotech International
Inc. 2017